Test and Tag Hibiscus Coast

A test and tag record shows that you are managing the electrical risk from equipment in your workplace. Head contractors, landlords and insurers may ask to see it. We give you a clear, itemised register with each item, its location, result and next test date, ready to file or hand over.

Test and tag on the Hibiscus Coast: holiday rentals, building sites and Silverdale businesses

Holiday rentals are a big part of the Hibiscus Coast, especially around Orewa, and they are often full of supplied appliances: heaters, toasters, kettles, lamps. Under regulation 26, those count as items supplied to the occupier of rented premises, so they are deemed safe with a current AS/NZS 3760 tag or if they are supplied through RCD protection. Houses that sit closed up between bookings can get damp inside, and salt carried on the wind reaches plugs and cords stored near the door, so we look hard at pins and cord ends during the visual check.

The new building around Millwater and Milldale means plenty of construction sites, where tools and leads are used outdoors in all weather. Those need much shorter retest intervals than office gear, and builders often book us to tag a whole trailer of equipment at once. Portable RCDs on the trailer are push-button tested too, since they are what protects workers using tools in the wet.

Silverdale's industrial and commercial area adds workshops, showrooms and offices, each with its own mix of equipment and retest dates. We keep one register per site with tag numbers and next due dates, and send reminders before the next round. Anything that fails is labelled, taken out of use, and repaired by our electricians or quoted for replacement, so a failed tag does not leave you short of equipment for long.

Local tip: If you manage several Orewa holiday homes, book them on the same day between guests so every property's register stays on one cycle.

Test and Tag in the Hibiscus Coast: Local Conditions

On the Hibiscus Coast we test and tag for retail, hospitality, trades and building sites in Silverdale, Orewa and Whangaparāoa. Smaller businesses can often be done in a single visit.

Homes in the Hibiscus Coast

Orewa's 1960s and 1970s beach houses were often built simply and extended later, with sleepouts, decks and garages added over the years. That can leave an original switchboard with no spare space, limited RCD protection and circuits stretched further than they were designed for. Holiday homes turned into full-time homes are worth an electrical check, because they now carry everyday loads such as heat pumps, dryers and induction cooktops. Peninsula homes from Red Beach to Army Bay span the 1970s to today, so wiring age varies a lot. Millwater, Milldale and newer Whangaparāoa homes are 2010s and later builds with modern switchboards and RCD protection throughout, and their internal garages usually make an EV charger a short, simple circuit, as long as the board has capacity.

How We Handle Test and Tag in the Hibiscus Coast

Each item is checked for visible damage, then tested with a portable appliance tester. Items that pass get a tag with the test date and next due date.

Pricing: a free quote and a fixed price agreed before we start. You get a written, itemised quote, and small jobs can be quoted from photos.

Test and Tag Jobs We Do in the Hibiscus Coast

Building site tools and leads
Workshop power tools
Warehouse test and tag in stages
Office equipment test and tag
Extension lead and power board testing