Test and Tag North Shore

A test and tag record shows that you are managing the electrical risk from equipment in your workplace. Head contractors, landlords and insurers may ask to see it. We give you a clear, itemised register with each item, its location, result and next test date, ready to file or hand over.

Test and tag across the North Shore, from Albany Centre to Takapuna

The North Shore's larger workplaces cluster around Albany Centre, Westfield Albany and Takapuna, where offices and retail tenancies carry rows of computers, monitors, chargers and power boards. Office IT equipment sits at the lower-risk end of the scale, so retest intervals there are longer than for tools or kitchen gear, and we test desk by desk so staff barely notice. Office kitchenettes add kettles, toasters and microwaves, which see heavier use and usually get shorter intervals.

In Takapuna's apartment buildings, the body corporate or building manager may own appliances in common areas such as gyms, lounges and cleaners' cupboards. Keeping those items on a register with clear retest dates gives the committee a record it can show an insurer or auditor, and failed items are withdrawn before a resident uses them again. Building managers get one register covering every floor.

The village shopping strips in Browns Bay, Milford and Devonport have cafes, salons and small shops where hair dryers, coffee machines and heaters work hard. Near the beaches, salt and humidity show up as corroded pins and stiff cords, which fail the visual inspection before any meter goes on. Builders working on the Shore's renovation and infill jobs can have site tools and portable RCDs tagged on site. Faults are repaired by our licensed electricians rather than just tagged and left, and the register is updated with the outcome.

Local tip: If your Albany or Takapuna office is moving floors or tenancies, book test and tag for the week after the move, when every lead and board has just been unplugged and handled.

Test and Tag in the North Shore: Local Conditions

North Shore clients range from clinics and schools to offices and light industrial units around Albany and Wairau Valley. We test on a schedule that suits each site.

Homes in the North Shore

Post-bridge homes in Glenfield, Browns Bay and the East Coast Bays are mostly single-level or split-level 1960s and 1970s houses wired in plastic-sheathed cable, which ages far better than rubber. The weak point is usually the switchboard: ceramic rewireable fuses or early circuit breakers, little spare space and RCDs on only some circuits or none. Current wiring rules require RCD protection on new and altered circuits, so a renovation is a good time to bring the board up to date. Devonport and Northcote Point villas are a different case, where old rubber-insulated VIR or TRS cable may still be in the roof space and should be replaced rather than extended. Albany's 1990s and 2000s homes generally have modern boards and garages, which makes them the simplest on the Shore for adding an EV charger, as long as the board has capacity for a dedicated circuit.

How We Handle Test and Tag in the North Shore

Each item is checked for visible damage, then tested with a portable appliance tester. Items that pass get a tag with the test date and next due date.

Pricing: a free quote and a fixed price agreed before we start. You get a written, itemised quote, and small jobs can be quoted from photos.

Test and Tag Jobs We Do in the North Shore

Scheduled retest visit
Café and kitchen appliances
Early childhood centre equipment
Replacing failed plugs and leads
Building site tools and leads